OSTEC KoPa

CE210T4K Digital Zoom Microscope · Option B

An integrated inspection microscope with a 15.6-inch display, autofocus, adjustable illumination and image-measurement tools. A complete digital microscope, not a camera adapter for an existing microscope.

KoPa CE210T Option B digital microscope with integrated screen

Inspect, measure and document at the bench.

For electronics, small components and surface inspection where on-screen viewing, focus control and image records are central to the workflow.

Optical magnification
0.3-1.8x
Working distance
120 mm
Live HDMI view
4K at 60 fps
Integrated screen
15.6-inch 4K

Built around inspection tasks

Electronics & assembly

Inspect connectors, board features and component surfaces with controllable illumination and on-screen viewing.

Small-part inspection

Use calibrated measurements and annotations to document visible features. Confirm required accuracy with a representative sample.

Training & documentation

Share a live view and save images for discussion. Compare a captured reference with the current inspection image.

See the inspection output

Manufacturer inspection examples from the CE210T Option B brochure. These are not HX measurements; sample dimensions and acquisition settings are not fully stated.

Limited-depth-of-field example
1. Single focusOnly part of the inclined connector is in focus.
Focus-stacking example
2. Focus stackingCombine focus planes to show more of the connector clearly. EDOF output: 1280 x 720.
Measurement & grid tools
Measurement & grid toolsManufacturer example showing on-image measurement and grid overlays on an electronic component.
Reference-image comparison
Reference-image comparisonTwo images can be viewed together for inspection. This is not the dual-specimen comparison microscope.

Optics, imaging and display

CE210T Option B specification guide
ParameterSpecification
Optical zoom0.3-1.8x
Working distance120 mm
Field of view26.5 x 14.9 mm at 0.3x; 4.2 x 2.4 mm at 1.8x
Live HDMI output3840 x 2160 at 60 fps; 1920 x 1080 at 60 fps
Focus stacking (EDOF)1280 x 720 image resolution listed
Display15.6 inch; 3840 x 2160; 100% Adobe RGB; 1000 cd/m²
Focus adjustmentSingle autofocus, live autofocus and manual focus; 15 mm rear fine adjustment
SoftwareKoPa View on-camera controls; KoPa Capture Pro for Windows
Advanced Imaging Specifications
Sensor, exposure and recording
ParameterSpecification
Camera sensor8.3 MP Sony IMX678 CMOS; 1/1.8 inch; 2 micrometre pixels
USB live viewH.264: 3840 x 2160 at 60 fps; MJPG: 3840 x 2160 at 30 fps
Video recordingDisplay-path recording: 4K at 30 fps or 1080p at 30 fps; USB recording modes listed up to 1080p at about 30 fps
Exposure10 microseconds to 10 seconds

Selection notes: 4K live view and saved video have different frame-rate limits; focus stacking is specified at 1280 x 720. Calibrate at the working zoom setting and verify the smallest required feature on a representative sample. Pixel count alone does not establish measurement accuracy.

Included equipment & optional accessories

CE210T Option B with display, stand and illumination

Option B system

  • Digital microscope, stand and integrated 15.6-inch display.
  • Near-coaxial illumination and four adjustable diffuse-light zones.
  • Wired mouse, HDMI cable, power adapter and two extension columns.
Optional CE210T polarisation module

Optional additions

  • Polarisation module, pictured, with adjustable angle.
  • XY stage with 20 x 20 mm travel and rotating platform.
  • Confirm fixture needs, sample clearance and inspection geometry.

Confirm the final packing list in your quotation. Other CE210T options have different display and supply arrangements.

Illumination control

Near-coaxial lighting and four independently adjustable diffuse-light zones adapt contrast to the sample. KoPa View provides lighting controls with 30 brightness steps. Evaluate glare on reflective surfaces using your own part.

Software & Manuals

For CE210T connected to a compatible Windows computer. KoPa Capture Pro is separate from the microscope's on-screen KoPa View controls; available functions depend on the connection and supplied configuration.

Discuss your inspection requirement

Share the part size, smallest feature, surface reflectivity, sample height and whether you need live viewing, saved video or calibrated measurements.

Source: OSTEC CE210T Series Option B brochure, version 2025.12 V1.0, and manufacturer product page. Confirm the supplied configuration with HX Technology.